XY-1A-4 water well drilling rig for 100m with pump and changable frame

water well drilling rig 1.high quality 2.quick to move 3.easy to operate 4.good service

  XY-1A Core Drilling Rig is a light type machine at high speed with hydraulic feeding. XY-1A (YJ) and XY-1A-4 are designed on the basis of XY-1A.

Applications:

1. Drillings for the general exploration and investigation of solid mineral deposit, engineering geotectonic survey and concrete structure inspection holes.

2.Diamond drill bit, alloy drill bit and steel roller drill bit and so on are available for drilling according to different geological structures.

 3.When the final holes are respectively 75mm and 46mm in diameter, the rated hole depths are separately 100m and 180m. The maximum of depth may not exceed 110% of that drilled in each hole. The maximum allowable hole diameter is 150 mm.

Features:

1.With hydraulic feeding device, elevated drilling efficiency, reduced labor strength.

2.The rig is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable.

3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole.

4.Compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.

Technical Specifications

Drill

Drilling depth            100 /180m

Initial hole dia.           150mm

Final hole dia.           75/46mm

Drill rod dia.               42/43mm

Angle range                90°-75°

Dimensions(L×W×H)       1700×780×1274(mm)

Weight(without power unit)   490kg

Swivel Head

Spindle speed(5-speed)           1010/790/470/295/140r/min

Spindle stroke                         450mm

Upward displacement speed of idling vertical spindle  0.05m/s

Downward displacement speed of idling vertical spindle  0.067m/s

Spindle pull-down max                                                15KN

Spindle lifting capacity max                       25KN

Hoist

Max .lifting capacity(single rope)             15KN

Lifting rotating speed                              121/76/36 r/min

Hoisting drum linear velocity (two levels)    0.166/0.331/0.733/1.465 m/s

Drum dia.                                               140mm

Wire rope dia.                              9.3mm

Wire rope capability                      35m

Brake dia.                                   252mm

Brake belt width                          50mm

Water Pump

Model                                Horizontal reciprocating single-acting piston pump

Displacement max

Equipped with diesel engine                 95L/min

Equipped with motor                           77L/m

Allowable working pressure max         1.2Mpa

Continuous working pressure              0.7Mpa

Suction pipe dia                                32mm

Discharge pipe dia                            25mm

Oil Pump

Model                                YBC-12/80

Rated pressure                   8Mpa

Displacement                     8ml/r

Rated speed                      1500r/min

Power (diesel engine or motor)

Model (diesel engine)                  S1100A2

Rated power                              10.3KW

Rated speed                              2200r/min

Model (motor)                             Y160M-4

Rated power                               11KW

Rated speed                           1460r/min

XY-1A-4 water well drilling rig for 100m with pump and changable frame